Polish Energy Facility Hacked

Saturday, 7 November 2026
Latest News · In-Depth Guides · Information & Tips to Keep You Safe

← Back to articles

Polish Energy Facility Hacked

Poland’s national computer emergency response team, CERT Polska, has published a report on a second attack on the country’s power sector in December 2025, SecurityWeek reports. The attackers’ goal was described as “purely destructive”, and the team says it appears to be the first time a private APN (a private mobile data network) was used as an attack route.

What happened

The report covers an attack that ran in parallel with a previously disclosed one. In that earlier attack, SecurityWeek says, threat actors linked to the Russian government, in particular a group called Sandworm, targeted communication and control systems at roughly 30 sites, including combined heat and power (CHP) plants and renewable energy dispatch centres. Some industrial devices were permanently damaged, but there were no electrical outages.

The second attack hit a smaller CHP plant supplying heat to 50,000 residents. It shut down a steam turbine and a water treatment system and disrupted the cogeneration process. Heat and electricity supply were not interrupted, and systems were restored quickly. It happened during maintenance work, so it was first thought to be an engineering error until CERT Polska determined it was hacker activity.

How the attackers got in

According to the report, the intrusion began on an internet-connected Fortinet VPN and firewall device at a wind farm. The attackers then found a Teltonika cellular router on the same network, accessed its admin interface and used an SSH service on it to create a tunnel into a private APN network run by the distribution system operator. From there they scanned the network, found a Wago controller at the CHP plant and used an SSH service on it to reach the plant’s operational technology network. After about a week of reconnaissance they connected to Siemens controllers, switched them to “stop” mode and set a password to stop operators changing them. Staff limited the downtime by resetting the controllers to factory settings and reloading logic from backups. CERT Polska warns that the same vulnerable configuration is common in Poland and other countries.

The takeaway

This is mostly a story for industrial IT teams, but the lessons are general: devices that face the internet need to be patched and locked down, admin interfaces should not be reachable from outside, and backups are what make a quick recovery possible. For a plain-language overview of attacks like this, see our guide on what malware is.

Source: Read the original report

Related reading

Check it yourself with our free tools

  • Free Temporary Email Generator: Get a free temporary email address (10 minute mail) for sign-ups, trials and verification codes.
  • Password Breach Checker: Free password breach checker: find out if your password has been leaked in a data breach.
  • Scam Email Checker: Free scam email checker: paste a suspicious email or message and check it for phishing and fraud red flags.
Scroll to Top
Privacy Policy · Terms of Use · Cookie Policy